NEW Guidelines Surrounding the Purchase of Pest Control Products in Protected Spaces

Attention Protected Producers! There is a new national standard on the block.

The Protected Agriculture Stewardship Standards were established to assist protected agriculture operators in the identification and mitigation of risk associated with pesticide application. This set of standards was drafted by a multi-stakeholder committee including CropLife Canada in collaboration provincial and federal grower groups. Health Canada's Pest Management Regulatory Agency (PMRA) and Agriculture and Agri-Food Canada (AAFC) acted in an advisory capacity to guide development of the standards.

The standards apply to any crops grown under structures, such as greenhouses, shade houses, hoop houses, high tunnels, warehouses, containers etc. This new motion requires a certificate in order to purchase any pest control products registered for use in protected spaces effective January 1, 2024. This includes biological-based products, as well as conventional chemistries. 

There are two general streams associated with this new set of standards:

Category 1PA -> Protected Ag Operators using any closed loop irrigation/chemigation systems. A closed loop system is one where any excess irrigation/chemigation liquid delivered to the crop is captured via trough. drainage tile, or other similar conveyance system. Operators using these systems are referred to as Category 1Pa Operators. 

NOTE: warehouse production structures and freight container growing operations with no subterranean plumbing and continuous flooring are excluded from this group

Category 2PA -> Protected Ag Operators not using closed loop irrigation/chemigation systems are referred to as Category 2PA Operators. 

The path forward looks different depending on which of the two streams your particular farm falls into.

A few additional tidbits:

-For those who have both types of irrigation/chemigation on their farm, a category 2 waiver is not needed. Follow through the path for Category 1PA. 

-For farms that have multiple locations/addresses - 

• A site spanning multiple address that are adjacent to one another will be considered a single site
• Multiple addresses that are NOT adjacent to one another will each be treated as a separate assessment, and a separate registration must be completed. 

-What happens if I am currently a Category 2PA operator, and we install a closed loop system in all/some of our operation?

•     When a category 2 waiver is completed, the operator agrees to terms, including notifying the AWSA of any changes in use, scope, or category. In these cases, the operation should be audited for compliance with the Standards. Once successfully audited, a certificate will be issued which renders the original category 2 waiver redundant. 

Stay tuned for details on an upcoming virtual Q&A session with a representative from CropLife in the next month! This will be a great opportunity to get clarity on the new standards effective January 1, 2024. Deadline to Register is December 31, 2023. 

In the meantime, feel free to explore AWSA's page on the Protected Agriculture Stewardship Standards and the resources provided there. 

-Talia 

Webinar Alert - Plant Health Virtual Conference

 Get those calendars ready folks, we have another greenhouse webinar coming up! This (FREE) virtual event takes place Wednesday March 23 from 12-4pm EST and focuses on various ways to improve on plant health in controlled environments. 

So, what are we going to be hearing about?

Watching Water Quality - 12:20 - 1:05 pm

Water quality is extremely important to consider for protected production, especially in a hydroponic setup. Water quality can impact long-term root-zone pH and EC, as well as root disease susceptibility, pesticide applications, equipment longevity and appropriate fertilizers. Neil Mattson, Associate Professor at Cornell University, will discuss why and how often you should be submitting your water for a quality test. From there, he will review some of the key aspects to focus on when interpreting the results from the lab, as well as highlight some of the things on that report that are slightly less important to help keep us on track. By understanding your water, and the impact it has on your crop, you can help mitigate any water-based headaches around the facility and help improve the overall growing conditions (and productivity) of the crop

The Physics of Spraying in Closed Environments- 1:15 - 2:00 pm

Jason Deveau, the Application Technology Specialist at OMAFRA will explore the physics of spray application methods that are specific to closed environments. By understanding how spray behaves, and through using simple diagnostic methods to characterize your current spray tendency, operators can improve the efficacy and productivity of the products applied in the protected space.

Quality Assessment of Biological Control Agents (BCA): Why It Is Important to Know if your BCA are Alive or Dead - 2:10 -2:55 pm 

Dr. Raymond Cloyd, Professor/Extension Specialist out of Kansas State University will provide an overview of biological control, and then focus in on the importance of developing quality assessments to ensure that your BCA are functional. Functionality is key for successful insect and mite populations, so it is important to implement these assessments into your usual routine!

Growing Media Selection for Optimized Plant Health - 3:05-3:50 pm

Dr. Brian Jackson, Director of Horticultural Substrates Laboratory at North Carolina State University, is going to talk about the importance of selection and management of growing media. When done properly, it is easier to promote root growth and development, which is crucial for overall plant health and success. Additionally, precise water management of substrates/containers at different times over the cropping cycle of plant production can aid in growth regulation as well as the post production shelf life of plants. Dr. Jackson will also comment on new substrates that are entering the marketplace, and talk about how they compare to traditional mixes when it comes to water management. 

______________________________________________________________

This fantastic line up will help get you start your growing season on the right foot, so definitely consider tuning in if you are looking to improve the quality of your greenhouse plants! 

If you are interested in registering, or learning more about the event, click here

Whats New with Biological Control?

  2021 has seen a lot of new and exciting things in the world of IPM with some of the tools available to producers for managing pest populations. Please find a quick summary of some of these new developments below with their corresponding contact information – this is a list of curated material from various sources, credit must be given where credit is due!

1)Introducing Anystis, the new generalist predator in our toolbox

 Anystis is a new generalist predator which was discovered and trialed by Vineland Research and Innovation Centre. This predator has shown control over thrips and spider mites as well as suppression of aphid populations. Not only that, but it also preys on Echinothrips and mealybugs, which currently do not have effective options when it comes to biological control agents! Not only that, but Anystis is compatible with other commonly used biocontrol agents, meaning less stress about adjusting your current regimes and more success overall when it comes to targeting your problematic pests. 

The use of Anystis has been validated in commercial greenhouse trials on gerbera and sweet pepper in Ontario, and further supported by promising results generated through recent trials at Niagara College for use in cannabis to control aphids. The predator has been transferred to Applied Bio-nomics Ltd for scaling up the rearing system and commercialization, and have a limited number of mites available for growers to try.

For more information on Anystis, contact Rose Buitenhuis, PhD Senior Research Scientist, Biological Control at Vineland Research.

 

2)Slow-release method of nematodes

The current application of beneficial nematodes is limited to sprenches, or drenches, across the surface of the growing media. The biggest targets for beneficial nematodes are the larvae of fungus gnats and western flower thrips, as well as onion thrips pupae. While the product is quite effective, the current application method to the crop sees a few technical difficulties. These drenches/sprenches are not the most effective when it comes to penetrating deeper into the growing mix, and they must be applied on a weekly basis. Not only that, but the current methods of distribution sees a very poor storage capacity – all must be distributed at once, which leaves the small producers in a bit of a financial pinch!

E-Nema is a new tech company based in Germany. They have come out with a slow-release method for these beneficial nematodes which tackles some of the difficulties associated with the existing system. These look similar to tapioca pearls, and are designed to be incorporated into the growing mix before planting. Then, over time, they will slowly release nematodes through the entirety of your growing container. These pearls are very safe, and do not contain any harmful chemicals. In addition to that, they store quite well, which is a win for smaller producers who may not need massive volumes to be distributed all at once. The reintroduction and inoculation of low doses of nematodes has proven to be more effective than coming in hot and heavy with one dose during the cycle, and this technology allows just that! 

BioBee will be the distributer for this new product, so be sure to keep your eyes peeled for that! I want to give a huge shoutout to the Cannabis Cultivation & Science Podcast for keeping up with the biocontrol world and spreading the word on cool innovations like this one!

3)New rearing methodology for Phytoseiulus persimilus

Our old reliable predatory mite is coming at us new and improved! BioBee has re-evaluated their current rearing methods for persimilis and has landed on a product that addresses some of the downfalls to the original release system. The original system sees that the predators are reared on spider mites, meaning they come out of their sachets starved and ready to tackle some serious spider mites. While that works well in heavily infested crops, it doesn’t bode well for the low pest pressure grow room, or the preventative release strategy either. This new product raises the predators on mite eggs, meaning that each sachet will come with a variety of life stages, and each sachet will have a long-life span overall as these different stages progress towards adulthood. These sachets can see up to 12 days to release the contents, giving you almost 2 weeks of release from one purchase. The new food source sees that these mites are not as hungry as they would be when raised on spider mites. This means they have time to establish in the crop, as well as hunt down those low density mites that are scattered through the room. Not only that, but there is no carrier mixed in with these predators. This is a huge win for producers of heavily-trichomed crops, as their plants will no longer be littered with pesky lingering carrier bits.

Figure 1. An image of persimilis predating on a two-spotted spider mite. Photo credit: Biotactics Inc. 

This new persimilis can also be purchased in bottle form. But grower be warned! It was interestingly noted that these predators are not their characteristic red colour when you receive them from the insectary. That colour develops on the persimilis as they start feeding on spider mites. This acts as an added bonus when it comes to your scouting efforts. If you note which predators have transitioned from milky to red, you can get a sense of the pest pressure in the space and how effective your release was at managing the spider mite population.

I want to give a huge shoutout to the Cannabis Cultivation & Science Podcast for keeping up with the biocontrol world and spreading the word on cool innovations like this one!

______________________________________________________________

Posted by: Talia Plaskett